Support Centre for Homeowners

With a string inverter there is a single point of failure. If the string inverter fails, the entire array is offline. However, with a microinverter each individual PV module has its own dedicated inverter. If the microinverter (or the associated PV module) should fail. only that PV module is offline while the remainder of the system continues to operate.​ Enphase microinverters have a publicly stated defect rate of 0.05%, which equates to 1 in 2000. Given that the Enphase defect rate is better than most string inverters, this results in a PV installation with higher reliability and a higher overall system uptime over the life of the array.

Additionally, Enphase microinverters have an estimated useful life of more than 25 years, compared with string inverters that typically last around 10 years.

SunPower AC solutions offer higher yield, easier and faster installation, and greater flexibility. There are also other benefits such as reliability, shading advantages and low-light power responses.

All AC module installations must be Internet connected for the monitoring to receive the 25-year microinverter warranty. This Internet connection reports data to the Enphase monitoring platform, Enlighten on a per microinverter/module basis. The performance of each microinverter and module is visible to the installer via Enlighten and alerts are provided for any faulty equipment, such as an under-performing PV module or a faulty microinverter.

A photovoltaic (PV) solar system is comprised of solar panels, racks for placing the panels on your roof, electrical wiring and an inverter. From sunrise to sunset, the solar panels generate electricity (DC) which is sent to an inverter. The inverter converts the DC electricity into alternating current (AC), which is the type of electricity required for household use. The AC power is delivered directly to your home’s main electrical service panel for use by you and your family.

A microinverter is a small electronic device that sits beneath each solar panel. It’s main task is to convert direct current (DC) from your solar panels into alternating current (AC) electricity that you can use in your home or export to the grid.

All grid-connected modules with integrated inverters must comply with all the requirements and tests established in parts 1 and 2 of the UNE-206007 Report. Prior to the connection and/or contracting of self-consumption, and as indicated in section 4 of part 2, this compliance must be certified by a certification body accredited according to UNE-EN 1S0/IEC 17065.